Canon MG6400 series Online Manual page 119

12. Check that Password is displayed, then press the OK button.
The screen to enter the password is displayed.
13. Enter the password.
Enter the password as well as the login name or e-mail address.
Note
• Depending on the setting on the photo sharing site, entering the password may not be
necessary.
14. Press the left Function button.
The machine accesses on the photo sharing site, then your account is confirmed.
After the confirmation of account is complete, the confirmation screen to save the login name or e-mail
address and password is displayed.
15. Use the button to select the setting, then press the OK button.
The account registration is complete.
Resetting the Web Service Settings
This function resets all web service settings.
Reset the web service settings following the procedure below.
1. Make sure that the machine is turned on.
2. Select Setup on the HOME screen.
LCD and Operation Panel
3. Select Device settings, then press the OK button.
4. Use the button to select Reset setting, then press the OK button.
5. Use the button to select Web service setup only, then press the OK button.
The confirmation screen is displayed.
Note
• When you select Reset all, all settings you made including the web service settings are reverted
to the machine back to default.
6. Use the button to select Yes, then press the OK button.
The web service setting is reset.
119