Filling The Engine With Oil; Charging The Battery; Installing The Fuse - Toro 20794 Operator's Manual

2. Filling the Engine with Oil

Your mower does not come with oil in the engine.
1. Remove the dipstick (Figure 7).
Figure 7
2. Slowly pour oil into the oil fill tube until the oil level
reaches the Full line on the dipstick (Figure 7). Do not
overfill. (Max. fill: 26 oz. (0.77 l), type: SAE 30W
detergent oil with an API service classification of SF,
SG, SH, SJ, SL, or higher.)
3. Install the dipstick securely.
Important: Change the engine oil after the first 5
operating hours; change it yearly thereafter. Refer
to Changing the Engine Oil.

3. Installing the Fuse

Model 20796 only
Your mower comes with a 40-amp fuse that protects the
electric starter.
Important: You cannot start the mower with the
electric starter or charge the battery unless you install
the fuse.
1. Unclip both ends of the battery cover and remove it
(Figure 8).
Figure 8
Note: Remove the temporary decal from the battery
cover.
2. Install the fuse in the fuse holder as shown (Figure 9).
Figure 9
Note: Your mower comes with a fuse in your owner's
packet and another fuse in the battery box.

4. Charging the Battery

Model 20796 only
Charge the battery for 24 hours. Refer to Charging the
Battery in Maintenance.
6