Samsung LE22B350 User Manual page 7

3 ANT IN
– Connects to an antenna or cable TV system.
4 COMMON INTERFACE Slot
– When not inserting 'CI CARD' in some channels, 'Scrambled Signal' is displayed on the screen.
– The pairing information containing a telephone number, CI CARD ID, Host ID and other information will be displayed in
about 2~3 minutes. If an error message is displayed, please contact your service provider.
– When the channel information configuration has finished, the message 'Updating Completed' is displayed, indicating that
the channel list is now updated.
You must obtain a CI CARD from a local cable service provider. Remove the CI CARD by carefully pulling it out with your
N
hands since dropping the CI CARD may cause damage to it.
Insert the CI-Card in the direction marked on it.
N
The place of the COMMON INTERFACE Slot may be different depending on its model.
N
CAM is not supported in some countries and regions, check with your authorized dealer.
N
5 KENSINGTON LOCK (depending on the model)
– The Kensington Lock (optional) is a device used to physically fix the system when used in a public place. If you want to
use a locking device, contact the dealer where you purchased the TV.
The location of the Kensington Lock may be different depending on its model.
N
6 Headphones jack
– Headphone may be connected to the headphone output on your set. While the head phone is connected, the sound from
the built-in speakers will be disabled.
Using the sound function is restricted when connecting headphones to the TV.
N
Prolonged use of headphones at a high volume may damage your hearing.
N
You will not hear sound from the speakers when you connect headphones to the TV.
N
The headphone volume and TV volume are adjusted separately.
N
7 COMPONENT IN / AV IN
– Connect component video cables (optional) to component connector (P
to corresponding component video out connectors on the DTV or DVD.
– If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box to the DTV (or DVD)
and connect the DTV (or DVD) to component connector (P
– The P , P and Y connectors on your component devices (DTV or DVD) are sometimes labelled Y, B-Y and R-Y or Y, Cb
R B
and Cr.
– Connect RCA audio cables (optional) to [R-AUDIO-L] on the rear of your set and the other ends to corresponding audio
out connectors on the DTV or DVD.
– The COMPONENT IN jack is also used as the AV IN jack.
Connect the video cable to the COMPONENT IN / AV IN [Y/VIDEO] jack and the audio cable to the
N
COMPONENT IN [R-AUDIO-L] jacks.
8 EXT
Connector
Video
EXT O
– Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players.
Input
Audio (L / R) RGB
O O
English - 5
, P , Y) on the rear of your set and the other ends
R B
, P , Y) on your set.
R B
Output
Video + Audio (L / R)
Only TV or DTV output is available.