Washing Clothes Using The Cycle Selector - Samsung WF1702WQ User Manual

washing a load of laundry
Your new washing machine makes washing clothes easy, using Samsung's "Fuzzy Control"
automatic control system. When you select a wash program, the machine will set the correct
temperature, washing time, and washing speed.
1. Turn on your sink's water tap.
2. Press the Power(
3. Open the door.
4. Load the articles one at a time loosely into the drum, without overfilling it.
5. Close the door.
6. Add detergent, softener, and pre-wash detergent (if necessary) into the appropriate
compartments.
Pre-wash is only available when selecting the Cotton(
Bedding(
your clothing is heavily soiled.
7. Use the Cycle Selector to select the appropriate cycle according to the type of material:
Cotton(
Drum Clean( ), Super Eco Wash( ), Outdoor Care( ), Baby Care( ), Wool ( ), Hand Wash(
). The relevant indicators will illuminate on the control panel.
8. At this time, you can control the wash temperature, the amount of rinses, the spinning
speed, and the delay time by pressing the appropriate option button.
9. Press the Start/Pause(
and the remaining time for the cycle will appear in the display.
Within 5 minutes of starting a wash, it is possible to add/remove laundry items.
1. Press the Start/Pause(
The door cannot be opened when the water is too HOT or the water level is too HIGH.
2. After closing the door, press the Start/Pause(
After the total cycle has finished, the display will show "End" for 5 seconds, and then the power
turns off automatically.
1. Open the door.
2. Remove laundry.
28_ washing a load of laundry
) button.
), Dark Garment( ), Daily Wash( ), Baby care( ) cycles. It is only necessary if
), Synthetics( ), Denim(
) button and the wash will begin. The process indicator will light up
) button to unlock the door.
), Synthetics(
), Bedding( ), Dark Garment( ), Daily Wash( ), Eco
) button to restart the wash.
), Denim( ),