Washing A Load Of Laundry; Washing For The First Time; Basic Instructions - Samsung WF1702WQ User Manual

washing a load of laundry

With your new Samsung washing machine, the hardest part of doing laundry will be
deciding which load to wash first.
Before washing laundry for the first time, you must run a complete empty cycle (i.e. no laundry).
1. Press the Power
2. Add a little detergent to the detergent compartment
the detergent drawer.
3. Turn on the water supply to the washing machine.
4.
5. Press the Start/Pause
This will remove any water that might be left over in the
machine from the manufacturer's test run.
To use liquid detergent, use the liquid detergent box (refer to page 31 of the manual for the
corresponding model). Do not add powdered detergent into the liquid detergent box.
1. Load your laundry into the washing machine.
Do not overload the washing machine. To determine the load capacity for each type of
laundry, refer to the chart on page 30.
Remove any remaining detergent, as they may cause a water leak.
running or you might be exposed to hot water or steam.
2. Close the door until it latches.
3. Turn the power on.
4. Add detergent and additives to the dispenser drawer.
5. Select the appropriate cycle and options for the load.
The Wash Indicator light will illuminate and the estimated cycle time will appear in the display.
6. Press the Start/Pause
button.
( )
button.
( )
: Detergent for prewash, or starch.
: Detergent for the main wash, water softener, pre-soaking agent, bleach and
stain removal product.
: Additives, e.g. fabric softener or former (fill no higher than lower edge (MAX)
of "A")
button.
( )
in
washing a load of laundry _21