Connecting The Water Supply Hose - Samsung WF80F5 series User Manual

STEP 3 - Adjusting the levelling feet
When installing your washing machine, ensure that the power plug, the water supply, and the drain are
easily accessible.
1. Slide the washing machine into position.
2. Loosen all the lock nuts with the wrench.
3. Level your washing machine by turning the levelling feet as necessary
by hand.
4. When your washing machine is level, tighten the lock nuts using the
wrench.
CAUTION: Do not move your washing machine unless you
tighten the lock nuts. This may result in damage to the leveling
feet.
STEP 4 - Connecting the water and the drain

Connecting the water supply hose

WARNING: Do not connect multiple water supply hoses together. This may result in a water leak and
electric shock due to the water leak. If the hose is too short, replace the hose with a longer, high pressure
hose.
1. Connect the L-shaped arm fitting for the cold water supply hose to the
cold water supply intake at the back of the washing machine. Then
tighten it by turning
(*): Optional
2. Remove the adaptor (B)
(C).
Untitled-43 15
part (A)
clockwise by hand.
from the other end of the
English - 15
A
water supply hose
B
C
2014-04-25 5:59:48