Wi-Fi Direct - Samsung Galaxy TAB 3 User Manual

–
Install certificates: Install authentication
certificates.
–
MAC address: View your device's MAC address,
required when connecting to some secured networks
(not configurable).
–
IP address: View your device's IP address (not
configurable).
• WPS push button: Set up a connection to a WPS
(Wi-Fi Protected Setup) router or other equipment.
• WPS PIN entry: View the PIN used by your tablet to set
up a PIN-secured connection to a Wi-Fi router or other
equipment (not configurable).

Wi-Fi Direct

Wi-Fi Direct allows device-to-device connections so you can
transfer large amounts of data over a Wi-Fi connection.
Note: See your service plan for applicable charges for
Wi-Fi Direct.
1. From a Home screen, touch
Wi-Fi.
2. Touch ON/OFF button to turn Wi-Fi on.
3. At the top of the Wi-Fi screen, touch Wi-Fi Direct.
4. Repeat Steps 1–3 on the other device with which you
want to connect.
The steps on the other device may vary depending on
the device. Refer to the documentation for that device.
5. On your tablet, touch Scan. The device scans for other
Wi-Fi Direct devices.
6. Once the device you want to connect to displays,
touch it.
7. The other device has 1 minute to touch Connect for
the connection to be made.
8. Once connected, the other device will show as
Connected in your list of Wi-Fi Direct devices and the
icon will display at the top of your screen.
Apps Settings
Connections 81