Turning Your Device On And Off; Setting Up Your Device - Samsung Galaxy TAB 3 User Manual

Turning Your Device On and Off

Turning Your Device On
Press and hold the
Note: Your device's internal
antenna is located along the
top back of the device. Do
not block the antenna; doing
so may affect signal quality
and may cause the device to
operate at a higher power
level than is necessary.
Turning Your Device Off
1. Press and hold the
2. At the Device options prompt, touch Power off.
3. At the Power off prompt, touch OK.
Power/Lock Key.
Power/Lock Key.

Setting Up Your Device

When you first turn on your device, you are asked to set up a
few things. To do that, the following screens display. Some
screens can be skipped (touch Skip) or re-displayed (touch
Back). Some screens display depending on the options you
choose.
1. When you first turn on your tablet, the Let's set up
your device! screen displays.
2. The default language for your tablet is English. If you
would like to select Spanish, touch Español on the
bottom right-hand side of the screen.
3. Touch Terms & Conditions, read the End User License
Agreement for Ready2Go, then touch Back.
4. Touch get started.
– or –
Touch Remind Later to set up your device later and
then touch exit.
To access this screen later, touch
AT&T Ready2Go.
5. Read and follow the instructions on each screen to set
up your tablet.
Apps
Getting Started 9