I-Trac MT-1C User Manual page 7

Reply：SET OK
Turn off sleep mode:
SLEEP+user password+space+0
Eg：SLEEP0000 0
Reply：SET OK
18. Set Access Point Name (APN)
Command1： 803+user password+space+APN
eg：8030000 CMNET
Command2 : 803+user password+space+APN+space+APN user name+space+APN Password
Reply: SET GPRS APN OK
19. Set server IP address and Port
Command： 804+user password+space+IP+space+Port
Eg: 8040000 58.64.205.22 8000
Reply: SET SERVER IP AND PORT OK
18. Set Data upload interval time
Command：805+user password+Space+X
Eg： 8050000 20
Reply: SET OK
Device will upload location to platform every 20 seconds when car acc is on.
Command：809+user password+Space+X
X is the location upload interval when car acc off, in the unit of seconds.
Eg： 8090000 60
Reply: SET OK
Device will upload location to platform every 20 seconds when car acc is off.
Note : X is mean interval time, the unit is seconds，the wide is 【1，1800】
We suggest X be no more than 480 seconds to avoid gprs traffice jam.
Specail Command :
1、Reset Command : RESET
2、Restart Command RESTART
3、Read the current setup information Command: RCONF
Track by 900D web based tracking software Setup.
Please follow above commands to set ip,port(IP is 58.64.205.22, port 8000), and APN, data
upload interval.
Then please go to http://www1.igpstracking.net/
Enter the user name and password we provided. After log in, please go to "User Center-Asset
Manage", click "Add"