I-Trac MT-1C User Manual page 5

Turn geo-fence off
Command: 210+ password
Eg: 2100000
Reply: GEO-FENCE OFF
8. Battery low voltage alert
While device detect internal battery is low power, it will send coordinate message with
STATE:LOW P OWER
9 .Alert while power off
Open the power off alert Command: 011 + user password
eg: 0110000
Reply: POWER ALARM ON
Close the power off alert Command: 010 + user password
eg: 0100000
Reply: POWER ALARM OFF
10. Power cut
Cut power: 940+password
Eg: 9400000
Enable power: 941+password
Eg:9410000
11. Mileage Statistics(Software Support)
Set initial mileage value (zero clearing)
Command: 142+PW<+M+X>
Eg : 1420000
Reply : MILEAGE STATISTICS RESET OK
Eg : 1420000M1000
Reply : SET TOTAL MILEAGE OK,CURRENT：1000
Note: M is delimiter, X is initial mileage value with unit of meter
Read current mileage
Command: 143 + user password.
eg: 1430000
Reply : MILEAGE STATISTICS:ON，CURRENT TOTAL MILEAGE:XX.
12. Time Zone
Command: 896 + user password + D + NN
Eg: 8960000E08
Reply : TIME ZONE SET OK,CURRENT：E8.
Note : D takes E or W to indicate east or west time zone respectively. N takes a 2-digit number
(1-12) to indicate time zone
number.
13. Overspeed Alarm
Command : 122+user password+space+X
Eg: 1220000 120