Table of Contents
Advertisement
Hot water mode of Hydro Unit
You can adjust temperature of hot water tank by providing hot water .
Press the Mode button in DHW.
DVM Hydro Unit_MWR-WW00_IB_EN_03648A(1).indd 11
Start Hydro Unit operation by pressing the
Select the mode you want to operate by pressing the
Adjust desired temperature by pressing the
Temperature of
You can adjust the desired temperature by 0 . 5 °C within a range of
cooling discharge
5°C~25°C .
water
Indoor cooling
You can adjust the desired temperature by 1°C within a range of
temperature
18°C~30°C .
Temperature of
You can adjust the desired temperature by 0 . 5 °C within a range of
heating discharge
15°C~55°C .
water
Indoor heating
You can adjust the desired temperature by 1°C within a range of
temperature
16°C~30°C .
f Select
(saving),
(standard), and
in DHW section .
• You cannot select cool mode during the hot water mode .
• To operate hot water mode, you need to set the hot water function 'Yes' in the
NOTE
field specification setting mode(#3011) of wired remote controller and connect
the temperature sensor of hot water tank . ( 4~20mA, 0~100°C)
• When selecting heat mode and hot water mode at the same time, heat mode
and hot water mode will operate alternately .
button.
button.
button.
(power) by pressing the Mode button
2013-01-09 오후 2:06:21
11
Advertisement
Table of Contents
