Countdown Timer - Samsung NZ84F7NC Series User Manual

cooking zone.
The next active cooking zone is selected by touching the Timer
control
2. Use the Timer setting selectors (
or ) to set the desired amount of time,
for example, 15 minutes, after which the
cooking zone will automatically switch
itself off. The safety shutoff is now
activated.
To display the time remaining for any of the cooking zones, use
the Timer control
The corresponding control indicator will begin to blink slowly.
The settings are reset using the Timer setting selectors (
). After the set period of time has elapsed, the cooking zone
automatically switches itself off, an acoustic signal sounds as
confirmation and the timer display indicates.
To change the settings quicker, touch any of the
control sensors until the desired value is reached.
If the
begin at 99 minutes; if the
the time setting will begin at 1 minute.

Countdown timer

For the countdown timer to be used, the appliance must be
switched on but all the cooking zones must be switched off.
1. Touch the Timer control
will appear in the timer display.
2. Set the desired period of
time using the right rear
cooking zone's Timer setting
selectors (
The countdown timer function
is now activated and the
remaining time appears in the timer display.
To cancel the remaining time, touch the Timer control
sensor.
(Best)NZ84F7NC6AB_EU_DG68-00545A-00_EN.indd 26
will appear in the timer display.
sensor again.
sensor.
control sensor is touched first, the time setting will
or ).
26_English
control sensor is touched first,
sensor.
or
or
05/03/2014 11:27:08