Specifications - Sony BC-U2 Operating Instructions Manual

Action to take if an error is detected
Immediately disconnect the AC power cord from the AC power
source, remove the battery packs, and contact the vendor from whom
you purchased the apparatus.

Specifications

Voltage source 100 V to 240 V AC, 50/60 Hz
Power consumption 85 W
Current drain Charging: 143 VA (100 V), 180 VA (240V)
Output Charging: 16.4 V, 2.2 A/1.5 A
DC output: 12 V, 2.0 A
Peak inrush current (1) Power ON, current probe method: 65 A
(100 V)/95 A (240 V)
(2) Hot switching inrush current, measured in
accordance with European standard
EN55103-1: 29 A (230 V)
Operating temperature
Charging: 0°C to 45°C (32°F to 113°F)
DC output: −5°C to +45°C (23°F to 113°F)
Storage temperature −20°C to +60°C (−4°F to +140°F)
Dimensions (w/h/d) 177.0 × 53.2 × 137.0 mm
(7 × 2
Mass Approx. 650 g (1 lb 6 oz) (including DC
output cable, not including AC power cord)
Supplied accessories
DC output cable (Part number: 1-836-195-1x) (1)
Operating Instructions (1)
Warranty Booklet (1)
Design and specifications are subject to change without notice.
20
Specifications
1 1
/ × 5 / inches)
8 2
Note
Always verify that the unit is operating properly before use. SONY WILL
NOT BE LIABLE FOR DAMAGES OF ANY KIND INCLUDING, BUT
NOT LIMITED TO, COMPENSATION OR REIMBURSEMENT ON
ACCOUNT OF THE LOSS OF PRESENT OR PROSPECTIVE PROFITS
DUE TO FAILURE OF THIS UNIT, EITHER DURING THE
WARRANTY PERIOD OR AFTER EXPIRATION OF THE
WARRANTY, OR FOR ANY OTHER REASON WHATSOEVER.