Connecting The Wires - Fell Marine WiMEA User Manual

WARNING
NOTICE
WiMEA will not stop the engine when falling on
board your boat. You can stop the engine at any
time by pressing the button on your MOB Unit
or Boat Unit.

Connecting the Wires

Do not touch or cut any existing wires or
electrically conducting components before you
make sure the main voltage switch is OFF. Only
set the main voltage switch to ON after you are
finished cutting and connecting wires.
Ensure all wires and conductive
connection points are free from corrosion before
connecting any wires.
OS
(Open to stop)
CS (Close to stop)
21