Denon AVR-1604 Operating Instructions Manual page 31

RDS search
Use this function to automatically tune to FM stations that provide RDS service.
1
Set the input source to "TUNER".
(Main unit) (Remote control unit)
2
Press the RDS button until "RDS SEARCH"
appears on the display.
(Main unit)
3
Press the PRESET D (+) or H (–) button to
automatically begin the RDS search operation.
(Main unit) (Remote control unit)
If no RDS stations is found with above operation,
all the reception band are searched.
4
When a broadcast station is found, that station's
name appears on the display.
5
To continue searching, repeat step 3.
If no other RDS station is found when all the
frequencies are searched, "NO RDS" is
displayed.
1 3 2
1
3
PTY search
Use this function to find RDS stations broadcasting a designated program type (PTY).
For a description of each program type, refer to "Program Type (PTY)".
1
Set the input source to "TUNER".
(Main unit) (Remote control unit)
2
Press the RDS button until "PTY SEARCH"
appears on the display.
(Main unit)
3
Watching the display, press the PTY button to
call out the desired program type.
(Main unit)
4
Press the PRESET D (+) or H (–) button to
automatically begin the PTY search operation.
(Main unit) (Remote control unit)
If there is no station broadcasting the
designated program type with above operation,
all the reception bands are searched.
5
The station name is displayed on the display
after searching stops.
6
To continue searching, repeat step 4.
If no other station broadcasting the designated
program type is found when all the frequencies
are searched, "NO PROGRAMME" is displayed.
ENGLISH
1 4 2 3
1
4
31