Alcatel SM-02 Safety And Users Manual page 14

Wi-Fi/Bluetooth performance is slower than
GB
expected:
If other Bluetooth devices are also paired and connected
to your phone, it is normal for the file transfer rate via
Bluetooth to decrease. It is also normal behaviour for
the Wi-Fi speed to be impacted and you may experience
slower performance.
How many BT 4.0 Low Energy (BLE) devices
can be connected to the phone at most?
5 BLE devices can be connected to the phone at the
same time.
After Onetouch Move is installed and WATCH is
connected to your phone, the battery consumption speed
of your phone increases.
This is normal and the consumption includes:
• Connection keeping between your WATCH and phone
•
File transfer between your WATCH and phone
•
Disconnection, device scanning, and re-connection
Your WATCH fails to be charged.
• Make sure the USB connector of your WATCH is
correctly inserted into the computer. (The chip on the
USB connector must contact that of the computer.)
•
Make sure your WATCH is tightly inserted into the
USB port.
Vibration does not work.
• Charge and confirm that the battery works.
• Make sure the connection between your WATCH and
phone is not interrupted.
21
Smartband2_SM02_Regulation leaflet_ALXE-12L_150512.indd 21-22
WATCH vibrates unexpectedly.
• Check whether you have a notification.
• Make sure your WATCH is not far away from your
phone.
Your WATCH does not respond.
Press and hold the Power key for 10 seconds to restart
WATCH. This is only for emergency.
Factory reset
If the instructions above fail to solve the problem, try to
reset your WATCH.
In Onetouch Move, tap , then touch Watch\Settings\
Factory Reset to reset your WATCH.
GB
22
2015/5/12 14:16:26