Protecting The Environment; Optional Accessories - DeWalt DW830 Instruction Manual

Lubrication
Your power tool requires no additional lubrication.
Cleaning
WARNING: Blow dirt and dust out of
the main housing with dry air as often as
dirt is seen collecting in and around the
air vents. Wear approved eye protection
and approved dust mask when
performing this procedure.
WARNING: Never use solvents or
other harsh chemicals for cleaning the
non-metallic parts of the tool. These
chemicals may weaken the materials
used in these parts. Use a cloth
dampened only with water and mild
soap. Never let any liquid get inside the
tool; never immerse any part of the tool
into a liquid.

Optional Accessories

WARNING: Since accessories, other
than those offered by D
not been tested with this product, use
of such accessories with this tool could
be hazardous. To reduce the risk of
injury, only D
accessories should be used with this
product.
Consult your dealer for further information on the
appropriate accessories.
ACCESSORY TABLE
Max.
[mm]
D
DW830
d
125
D DW840
b
180
DW830
D
125
DW840
180
WALT, have
e
WALT, recommended
e
[mm]
Min. Periphical
Rotation speed
[min. ] [m/s]
-1
b d
DW830
11000
80
8 22.23
DW840
8000
DW830
11000
- -
80
DW840
8000

Protecting the Environment

Separate collection. Products and
batteries marked with this symbol
must not be disposed of with normal
household waste.
Products and batteries contain materials that can
be recovered or recycled reducing the demand for
raw materials. Please recycle electrical products
and batteries according to local provisions. Further
information is available at www.2helpU.com.
Threaded
hole
length
[mm]
-
-
-
English
13