Protecting The Environment - DeWalt DCG406 Original Instructions Manual

English
Consult your dealer for further information on the
appropriate accessories.
Max.
[mm]
D b
d
115 6.4 22,23
D
125 6.4 22,23
b
115 –
D
125 –
d
75 30
b
D
D
115 13
When using segmented diamond wheels, use only
diamond wheels with a peripheral gap not greater than
10 mm and negative rake angle.
segmented diamond wheels with a peripheral gap greater
than 10 mm and/or a positive rake angle.
For all grinding, sanding, and wheel type wire brushing
accessories, the lowest portion of the accessory must
be contained within the guard enclosure with 2 mm or
greater clearance to the bottom lip of guard.
14
Min. Peripherall
[mm]
Rotation speed
[min. ] [m/s]
–1
d
11,500 80
11,500 80
– 11500 80
– 11500 80
M14 11500 45
M14 11500 80
Additional information for guards and Accessories for DCg406, DCg413
DO NOT USE

Protecting the Environment

Separate collection. Products and batteries marked
with this symbol must not be disposed of with normal
Threaded
household waste.
hole length
Products and batteries contain materials that can
[mm]
be recovered or recycled reducing the demand for
raw materials. Please recycle electrical products and batteries
–
according to local provisions. Further information is available at
www.2helpU.com.
Rechargeable Battery Pack
–
This long life battery pack must be replaced when it fails to
produce sufficient power on jobs which were easily done
–
before. At the end of its technical life, discard it with due care
for our environment:
• Run the battery pack down completely, then remove it from
–
the tool.
• Li‑Ion cells are recyclable. Take them to your dealer or a local
recycling station. The collected battery packs will be recycled or
disposed of properly.
20.0
20.0
≤10 mm
≥2 mm