Table of Contents
Advertisement
that projects through the plane of the guard lip
cannot be adequately protected.
• This tool is not designed to be used with wire
wheels and wire cup.
WARNING: We recommend the use of
a residual current device with a residual
current rating of 30mA or less.
Residual Risks
In spite of the application of the relevant safety
regulations and the implementation of safety
devices, certain residual risks cannot be avoided.
These are:
– Impairment of hearing
– Risk of personal injury due flying particles.
– Risk of burns due to accessories becoming hot
during operation.
– Risk of personal injury due to prolonged use.
– Risk of dust from hazardous substances.
Markings on Tool
In addition to the pictographs used in this
manual, the labels on the tool show the following
pictographs:
Read instruction manual before use.
Wear safety glasses.
Wear ear protection.
DATE CODE POSITION (FIG. A)
The Date Code (16), which also includes the year of
manufacture, is printed into the housing.
Example:
2016 XX XX
Year of Manufacture
Package Contents
The package contains:
1 Angle grinder
1 Guard
1 Side handle
1 Flange set
1 Two-pin spanner
1 Instruction manual
• Check for damage to the tool, parts or
accessories which may have occurred
during transport.
• Take the time to thoroughly read and
understand this manual prior to operation.
Description (fig. A)
WARNING: Never modify the power
tool or any part of it. Damage or personal
injury could result.
1 ON/OFF-switch
2 Lock-off button
3 Side handle
4 Guard
5 Spindle lock
INTENDED USE
Your DW830/DW840 heavy-duty angle grinders
have been designed for professional grinding,
sanding and cutting-off applications.
DO NOT use under wet conditions or in the
presence of flammable liquids or gases.
DO NOT use grinding wheels other than fibre
reinforced centre depressed wheels and flap-disk.
These heavy-duty angle grinders are professional
power tools.
DO NOT let children come into contact with the
tool. Supervision is required when inexperienced
operators use this tool.
• Young children and the infirm. This appliance
is not intended for use by young children or
infirm persons without supervision.
• This product is not intended for use by persons
(including children) suffering from diminished
physical, sensory or mental abilities; lack of
experience, knowledge or skills unless they are
supervised by a person responsible for their
safety. Children should never be left alone with
this product.
Electrical Safety
The electric motor has been designed for one
voltage only. Always check that the power supply
corresponds to the voltage on the rating plate.
Your D
WALT tool is double insulated in
e
accordance with IEC60745; therefore no
earth wire is required.
If the supply cord is damaged, it must be replaced
by a specially prepared cord available through the
D
WALT service organization.
e
English
9
Advertisement
Table of Contents
