Panasonic DMR-BCT835 Operating Instructions Manual page 49

Playing back video
Operation during play
3D settings during playback
Change this setting when the screen is
not correctly displayed for 3D
compatible programmes.
1 Press [OPTION].
Select "Playback Settings" in "Playback
2
Menu", then press [OK].
Select "3D Settings", then press [OK].
3
4 Select the item, then press [OK].
Signal Format
Original:
-
Keep original picture format.
Side by side:
-
3D picture format comprising of left and right
screens.
2D to 3D:
-
Converts 2D pictures to 3D effect while
playing.
3D Picture Mode
Normal:
-
Normal 3D effects.
Soft:
-
Soft 3D effects.
• This function cannot be enabled when
"Signal Format" is set to "2D to 3D".
Manual:
-
3D effects set manually (O below)
Manual Settings
(To change the setting, set "3D Picture Mode"
to "Manual".)
Distance
Set the amount of depth perception.
Screen Type
Selects how the screen appears during
3D playback (flat or round).
Frame Width
Set the amount of feathering at the
edge of screen.
Frame Colour
Set the colour of feathering at the edge
of screen.
Graphic Display Level
Adjust the 3D position for the playback menu
or message screen etc. (O 83)
48
VQT4W71
C3
• Depending on the contents, displayed items are different.
• This unit only guarantees the playback of the Frame
Sequential and the Side-by-Side (Half) programme types.
• Please refrain from viewing 3D images if you do not feel
well or are experiencing visual fatigue.
In the event that you experience dizziness, nausea, or other
discomfort while viewing 3D images, discontinue use and rest
your eyes.
• Depending on the connected TV, the video being played
back might switch to 2D video due to changes in resolution
etc. Check the 3D setting on the TV.
• 3D video might not output the way it is set in "HDMI Video
Format" (O 94) and "24p(4K)/24p Output" (O 94).
• It may display as Side-by-Side when playback of the 3D
video is started.