Advertisement
● Resetting all RADES Settings
1. Remove the power from the modem
2. Remove the plastic clip located on the back of the unit. To do this use a
small screwdriver to lift the center snap carefully and slide the clip up to
remove.
3. Locate the Yellow Reset button in the right clip slot, opened when the clip
is removed. The button is located towards the bottom of the slot.
4. Press the yellow button using a small screwdriver or paper clip. While
continuing to hold the button, apply power to the modem.
5. Hold the button until the LEDs move in a circular pattern
6. Cycle power and the unit should be back to factory settings
BACK
9
Advertisement
