Accessories; Remote Control - Teac DV-P100 Instruction

Please check and identify the supplied accessories.
Remote control (with battery) ............................................................................................. x 1
AC adaptor .......................................................................................................................... x 1
AC power cord ..................................................................................................................... x 1
Car plug adaptor .................................................................................................................. x 1
Earphones ........................................................................................................................... x 1
Rechargeable battery pack (Model no.: BATT-3P) ........................................................ x 1
Battery charger (Model no.: CHRR-2) ................................................................................. x 1
Carrying bag ........................................................................................................................ x 1
Using the Remote Control
• Point the Remote Control at the REMOTE SENSOR located on the unit.
• When there is a strong ambient light source, the performance of the infrared REMOTE SENSOR may be
degraded, causing unreliable operation.
• The recommended effective distance for remote operation is about 16 feet (5 meters).
Take out the PVC sheet before operating the Remote Control.
TO CHANGE REMOTE BATTERY
1. Open the battery door.
BATTERY REPLACEMENT
When battery becomes weak, the operating distance of the Remote Control will be greatly reduced and
you will need to replace the battery.
NOTE:
• If the Remote Control is not to be used for a long time, remove the battery to avoid damage caused by
battery leakage corrosion.
• WARNING: Do not dispose of batteries in fire, batteries may explode or leak.

ACCESSORIES

REMOTE CONTROL

2. Insert one CR2025 (3V) size battery.