1.
DISC REMOVAL PROCEDURE
1)
Insert a flat-head (-) screwdriver into a hole at the bottom, and
rotate the cam gear in the direction of the arrow A. (See Fig.1)
SERVICE NOTE
A
Fig. 1.
2.
NOTE ON REMOVING THE TABLE ASS'Y
1)
Remove the two screws. (See Fig. 2)
2)
Remove the two Plates (guide) in the direction of the arrows A
and B. (See Fig. 3)
3)
Remove the Table ass'y in the direction of the arrow C .
(See Fig. 3)
4)
Remove the Flexible flat cable (See Fig. 3).
C
B
– 5E –
– 5 –
DVP-NC85H
Fig. 2.
A