DVP-NC85H
2-9. OPTICAL PICK-UP
(DEVICE, OPTICAL KHM-313CAB/C2RP)
Caution Point on the Laser Diode:
Laser Diode in the optical Device is very sensitive to Surge Current or
ElectroStatic Discharge (ESD):
After take-out FMO-011 Flat Flexible Cable from CN101 of
MV-49 board immediately ground FMO-011 Flat Flexible Cable
pattern using short clip. Metal paper clip can be used as short
clip.
4 MD-112 Harness
(CN201, 6P)
2 FFC Holder
1 FFC Clamp
Caution Point on the Laser Diode Hardness:
Please make sure MD112 Harness (black tapping) always before
hook during assembly. Refer to Fig. 1.
2-6
Note:
Solder shortland before remove the
FMO-011 Flat Flaxible Cable from
24 pin BU connector.
Black Tapping
Fig. 1.