Quick Guide; Power Supply Connections - Omega Engineering DRF-POT User Manual

QUICK GUIDE

The DRF units have a front cover which
can be opened down. This cover gives
access to the Span and Offset
potentiometers, and to the selection
jumpers for input and output signal ranges.
To open the front cover, press slightly the
sides of the cover at the upper side, close
to the OUTPUT terminals, as indicated on
Figure1.
The cover is free to open down, as shown
on Figure2.

POWER SUPPLY CONNECTIONS

DRF units are powered through the plug-
in terminal positioned on the upper side of
the instrument. This terminal is placed in
a transverse axis, different from the other
terminals. Close to the power supply
terminal there is a small yellow label with
indications on the connections for AC and
DC
FIGURE 2
S V
IDE
User's Manual DRF Series
P
IEW
Page 5
F
RONT
IMPORTANT !! Check that the power
supply indicated on the white label
attached to the side of the instrument,
matches with the power supply you want
to connect.
For more accurate information on the
power supply connections, please see
page 6 of this manual.
S T
OWER UPPL Y ERMINAL
F
RONT
A
CCESS TO JUMPERS FOR
INPUT AND OUTPUT RANGE
SELECTION
S
PAN AND
POTENTIOMETERS
FIGURE1
V C
IEW WITH OVER
C O :
OVER PENING
,
AND ACCESS TO
O
FFSET ADJUST