Panasonic ES-LT7N Operating Instructions Manual page 21

Hide thumbs Also See for ES-LT7N:
Table of Contents

Advertisement

Available languages

Available languages

Problem
Makes a loud sound.
The shaver cannot be
charged.
The blades are not dry or
are sticky.
The blades crack or
deform during cleaning.
The cleaning liquid unit
cannot be removed.
ES-LT7N_US.indb
21
Action
During cleaning:
The self‑cleaning recharger
makes a loud sound due to the
cleaning of the blades.
After cleaning:
The self‑cleaning recharger
makes a loud sound due to the
removal of water droplets in
order to speed drying.
The sound after cleaning is different
from the sound during cleaning. The
water level has dropped and it is
removing water droplets from the
blades after cleaning. This does not
indicate a problem.
Gently wipe the main body rear
terminals and the charging
terminals of the self‑cleaning
recharger with a cloth or tissue
dampened with water.
The blades may not dry quickly
due to temperature conditions.
Run the "Dry/Charge" mode again
or wipe with a soft cloth before
shaving.
Do not insert any foreign objects
into the recharger.
Replace the system outer foil and/
or inner blades. (See page 18.)
Place the self‑cleaning recharger
on a hard, flat surface.
(See page 15.)
Problem
If you mix soapy water or hand
soap with the detergent or use
another detergent, the cleaning
liquid will foam. Use the self‑
The cleaning liquid has
cleaning recharger after
foamed.
thoroughly washing and drying
the shaver.
Replace the cleaning liquid.
Do not press the cleaning liquid unit
removal button during the mode.
Place the self‑cleaning recharger
Cleaning liquid leaked
horizontally.
from the cleaning liquid
If you use the self‑cleaning
unit.
recharger when the shaver is wet or
when soap or shaving gel is on the
shaver, cleaning liquid may leak.
►Shaver
Problem
The power switch does
Unlock the switch lock.
not turn ON.
(See page 11.)
Shavings fly out in all
This can be improved by cleaning
directions.
every time after shaving.
Replace the system outer foil if it
System outer foil gets hot.
is damaged or deformed.
(See page 18.)
When the number of operations
Operating time is short
per charge starts to decrease, the
even after charging.
battery is nearing the end of its life.
Action
Action
21
2015/04/17
17:45:29

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents