Getting Connected; Connecting To The Internet - Alcatel HERO 2 8030Y Manual

Hide thumbs Also See for HERO 2 8030Y:
Table of Contents

Advertisement

5.2.1
To set an alarm
From the Time screen, touch
to add a new alarm. The following options will appear:
• Repeat
Touch to select days when you want the alarm
to work
• Ringtone
Touch to select a ringtone for the alarm
• Vibrate
Select to activate vibration
• Label
Touch to set a name for the alarm
When finished, touch OK to confirm.
Touch and hold on a currently existing alarm and touch Delete alarm to
delete the selected alarm.
5.2.2
To adjust alarm settings
from the Alarm screen. The following options
Touch the Menu icon
can now be adjusted:
• Alarm in silent
Select to play alarm with sound or vibration
mode
even when the phone is in Silent mode
• Snooze duration
Touch to set temporary turn off time of an alarm
• Volume buttons
Touch to set side Volume up/down key
behaviors when alarm sounds: None, Snooze
or Dismiss
• Turn over to
Touch to choose the status Snooze or
activate
Dismiss. Touch the
off snoozing or to dismiss the alarm by turning
over the phone.
to enter the Alarm screen, touch
switch to turn on/
73
6

Getting connected ................

To connect to the internet with this phone, you can use GPRS/
EDGE/3G/4G networks or Wi-Fi, whichever is most convenient.
6.1

Connecting to the Internet

6.1.1
GPRS/EDGE/3G/4G
The first time you turn on your phone with a SIM card inserted, it will
automatically configure network service: GPRS, EDGE, 3G or 4G. If the
network is not connected, you can touch
To check the network connection you are using, touch Settings\More...\
Mobile networks\Access Point Names or Network operators.
To create a new access point
A new GPRS/EDGE/3G/4G network connection can be added to your
phone with the following steps:
• Drag down notification panel and touch
• Touch More...\Mobile networks\Access Point Names
• Touch Menu key and select New APN.
• Enter the required APN information.
• When finished, touch the Menu key and select Save.
To activate/deactivate Data roaming
When roaming, you can decide to connect/disconnect a data service.
• Drag down notification panel and touch
• Touch SIM management\Roaming\Data roaming.
• When Data roaming is deactivated, you can still perform data exchange
with a Wi-Fi connection (refer to "6.1.2 Wi-Fi").
on the Quick setting panel.
to access Settings.
to access Settings.
74

Advertisement

Table of Contents
loading

Table of Contents