Operation Panel - Canon MX450 series Online Manual

Operation Panel

* All lamps on the operation panel are shown lit in the illustration below for explanatory purposes.
(1) ON button (POWER lamp)
Turns the power on or off. Lights or flashes green to indicate the power status. Before turning on
the power, make sure that the document cover is closed.
Turning the Machine On and Off
(2) COPY button
Switches the machine to the copy mode. The Copy standby screen is displayed, which lets you
make copies while specifying the number of copies.
(3) FAX button
Switches the machine to the fax mode. The Fax standby screen is displayed, which lets you send
a fax by dialing a fax/telephone number directly with the Numeric buttons.
(4) LCD (Liquid Crystal Display)
Displays messages, menu items, and the operational status.
Confirming that the Power Is On
(5) Numeric buttons
Used to enter numerical values such as the number of copies, as well as fax/telephone numbers
and characters.
(6) Black button
Starts black & white copying, scanning, faxing, etc.
(7) Color button
Starts color copying, scanning, faxing, etc.
(8) Stop button
Cancels operation when print, copy, scan, or fax transmission/reception job is in progress.
(9) Alarm lamp
Lights or flashes orange when an error occurs, such as paper-out or ink-out.
(10) Tone button
Switches to tone dialing temporarily if your machine is connected to a rotary pulse line and
changes the input mode for entering characters. This button is also used to dial with the Numeric
buttons.
(11) OK button
Finalizes the selection of a menu or setting item.
Resolves an error when printing is in progress, resumes the machine's normal operation after
removing jammed paper, or ejects documents remaining in the ADF (Auto Document Feeder).
(12) and buttons
Used to increase/decrease a setting value such as the number of copies, and select a menu or
setting item. The
(13) Back button
or button is also used when entering characters.