Canon MX450 series Online Manual page 122

Changing the Machine Settings on the LCD
This section describes the procedure to change the settings in the Device settings screen, taking the
steps to specify Extended copy amt. as an example.
Note
The * (asterisk) on the LCD indicates the current setting.
1. Make sure that the machine is turned on.
Confirming that the Power Is On
2. Press the Setup button.
The Setup menu screen is displayed.
3. Use the button to select Device settings, then press the OK button.
When you change the fax settings, press the Setup button, then select Fax settings.
4. Use the button to select Print settings, then press the OK button.
5. Use the button to select Extended copy amt., then press the OK button.
6. Use the button to select a setting item, then press the OK button.
For details on each setting item:
Fax settings
Print settings
LAN settings
Dev. user settings
Mob. phone settings
Bluetooth settings
Firmware update
Reset setting