Troubleshooting - Rear view safety RVS-77535 Instruction Manual

Troubleshooting

Problem #1
Merging Image Is Not Accurate/Seamless
This problem is most likely caused by improper camera installation. Poor image quality
will result in calibration error. The problem may also be caused by improper calibration.
Remember, the more accurate your calibration, the better your merged image.
Problem #2
Merged Image Is Partially Mirrored
If you are using OEM cameras, check if the the image is mirrored. If mirrored, change
the setting.
Problem #3
Corner Picture Is Blank
These problem may be caused by the camera position. Make sure the camera has a
wide field of vision.
48
Rear View Safety