MAINTENANCE WORK ON FRAME AND ENGINE
–
Reset the fuel tank. (
–
Ensure that the drain plug on the radiator and the water pump cover are tightened.
–
Remove bleeder screw
700629-10
–
Position the vehicle as shown and secure it against rolling. Height difference
be reached.
Guideline
Height difference
Info
To make sure that all of the air can escape from the cooling system, raise the
0 0 A
A
front of the vehicle. A poorly bled cooling system is less effective at cooling and
the engine can overheat.
400677-10
p. 136)
.
50 cm (19.7 in)
134
must