Bi-Wiring Connection; Using Speaker Terminal B; Ac Mains Lead; Connections • Bi-Wiring Connection - Panasonic SA-XR55 Operating Instructions Manual

Home Theater connections -
Preparation: Turn off all components before making any connections.

Bi-wiring connection

You can enjoy high quality sound by connecting to speakers designed for bi-wiring.
BI-WIRE compatible speakers have separate terminals for the high frequency and low frequency signals.
• When using a bi-wiring connection, select "BI-WIRE " for "Bi-wiring settings". (ápage 12)
áRefer to page 15 for "Enjoying BI-AMP sound".
Front speaker (R)
HF
LF
Speaker impedance:
6-16 Ω
BI-WIRE:

Using speaker terminal B

For connection to a second pair of speakers. Use the A terminals to enjoy multi-channel sound.
If you select SPEAKERS B only, playback is 2-channel. When a multi-channel source is played, the sounds intended for all the speakers are played
through the front left and front right speakers (2CH MIX).
áRefer to page 14 for "Using SPEAKERS B".
Front speaker (R)
Speaker impedance:
Front A and B: 6-16 Ω
6-16 Ω
Front B:
Home Theater connections
FOR THE UNITED KINGDOM ONLY
READ THE CAUTION FOR THE AC MAINS LEAD ON PAGE 2 BEFORE CONNECTION.
RONT B CENTER SURROUND
HF
L R
8
Y P P
B R
IN
TV/STB
IN IN IN
OR DVD DVD RECORDER TV/STB
S VIDEO
FRONT A
Y P P
B R
LF
IN
TV/STB
R L
IN IN IN
DVD DVD RECORDER TV/STB
S VIDEO
SURROUND BACK
L R L

AC mains lead

(included)
AC IN AC IN
2. Speakers
FRONT A FRONT A FRONT B FRONT B CENTER
LF LF BI-WIRE BI-WIRE HF HF
R R L L R R L L
FRONT B FRONT B CENTER SURROUND
BI-WIRE BI-WIRE
HF HF
R R L L R
- 3. AC mains lead
To household
mains socket
Insertion of connector
(Except the United Kingdom)
Even when the connector is perfectly inserted,
depending on the type of inlet used, the front
part of the connector may jut out as shown in
the drawing.
There is however no problem using the unit.
HF: High frequency
LF: Low frequency
Front speaker (L)
SURROUN
HF
LF
R
SURROUND BAC
Front speaker (L)
L R
AC
Connect this cord after all other
cables and cords are
connected.
Note
• The included AC mains lead is
for use with this unit only. Do not
use it with other equipment.
• Do not use AC mains lead from
any other type of equipment with
this unit.
• If the unit is left unplugged for
longer than two weeks, all
settings will revert to the factory
settings. Perform the settings
again if this occurs.
Appliance inlet
Approx. 6 mm
Connector