Major Operating Controls And Their Functions - Panasonic K-SRC14 Manual

Major operating controls and their functions

8 7
[1][LINK] button
Pressing this button will becomes register mode with a microphone.
(Linkup connection is established or progress of
Refer to Operating procedures.
[2] POWER indicator [POWER]
(Green/Yellow/Red)
This LED lights green when the power is on and this unit is receivable under normal conditions.
This LED lights as follows to indicate other states:
E2 signal output provided: lighting red (Lighting green at Power OFF)
Page mute signal received: lighting yellow
[3]MIC1/MIC2 indicator [MIC1/MIC2]
This LED lights green when this unit is receiving signals from each microphone under normal conditions.
This LED lights as follows to indicate other states:
E2 signal output provided: lighting red. (Lighting green at E2 ACK input provided)
Page mute signal received: lighting yellow
E1 signal output provided: lighting (300ms) red
Feedback blocker in operation: lighting(5sec) yellow
[4] LINK indicator [LINK]
This LED lights yellow(500ms) when this unit is during ID registration(Pairing)
This LED lights red when this unit is system error
3 3
2 4 1
6 5
20 seconds will cancel this mode.)
6
9
Rev.1.1