Table of Contents
Advertisement
8. Shortcuts
Use shortcuts to skip the procedure to get into a menu.
Power up TechMaster.
Press and hold the button corresponding to the menu you want to access to.
Available shortcuts are:
= Access to Change User Code function. Press
or Master code.
= Access to PIN Dynamic Codes function.
= Access to Membrane test function.
= Access to System Info function.
= Come back to main menu.
9. Optional features
9.1. Codes Expiry
TechMaster can be set to have automatic Codes' Expiry (from 1 to 240 months) option.
If this option is set, LCD will display a warning message when a valid
code is entered starting from one week before the expiry date.
When LCD will display this message change your code.
If your code is expired LCD will display the message:
To change your code is the only function you will be allowed to do.
If your code is expired you will be not allowed to open the lock. Change your code before
operating the lock again.
9.2. Override Reopening
TechMaster can be set to have Override Reopening option (from 0 to 59 minutes). If this
option is set, it will be possible to reopen the lock overriding Time Delay during the set value
IU_TechMaster_02_eng
to change Manager, OVR Manager
CODE WILL EXPIRE IN
7 DAYS
CODE
EXPIRED
Page 29 of 32
Hide quick links:
Advertisement
Table of Contents
