Manager (Or Ovr Manager): Opening The Lock Without Time Delay - Techmaster T9530 Programming And Operating Instructions

LCD will display the message:
Enter a valid user code and insert the Dallas key, if set-up. LCD will
display Time Delay counting time:
Invalid code will prompt LCD to display the message
To abort Time Delay press
To operate with other locks press
time and then press
After Time Delay has elapsed, the LCD will display the Open Window
counting time.
Press , LCD will display the message:
Enter a valid user code and insert the Dallas key, if set-up. LCD will
display the message:
Invalid code will prompt LCD to display the message
Open the door within 3 seconds.
Before power-off, LCD will display current date and time.

7.3. Manager (or OVR Manager): Opening the lock without Time Delay

Power up TechMaster and select the lock when two or more locks are installed.
LCD will display the message:
Press to open with Manager code (or press it two times to open
with OVR Manager code), LCD will display the message:
Enter Manager code and insert the Dallas key, if set-up (or OVR
Manager code and insert the Dallas key, if set-up). LCD will display
the message:
Page 24 of 32
and then
during Time Delay counting
again.
to confirm.
USER CODE
X X – X X X X X X
TIME DELAY
00:59
WRONG CODE
STOP DELAY
COUNTING?
SELECT
LOCK:
OPEN WINDOW
00:01
USER CODE
X X – X X X X X X
OPEN
WRONG CODE
11:44 WED
01 / 09 / 2010
USER CODE
X X – X X X X X X
MANAGER CODE
X X X X X X
OPEN
IU_TechMaster_02_eng