Set The Date And Time - Canon EOS 70D Basic Instruction Manual

3 Setting the Date, Time, and Zone
If you store the camera without the battery or if the camera's battery
becomes exhausted, the date/time/zone may be reset. If this happens, set
the time zone and date/time again.
The date/time that was set will start from when you press <0> in step 6.
After changing the time zone, check that the correct date/time has been
set.
34

Set the date and time.

4
Press the <U> key to select the
number.
Press <0> so <r> is displayed.
Press the <V> key to set the
number, then press <0>. (Returns
to <s>.)
Set the daylight saving time.
5
Set it if necessary.
Press the <U> key to select [Y].
Press <0> so <r> is displayed.
Press the <V> key to select [Z],
then press <0>.
When the daylight saving time is set
to [Z], the time set in step 4 will
advance by 1 hour. If [Y] is set, the
daylight saving time will be canceled
and the time will go back by 1 hour.
Exit the setting.
6
Press the <U> key to select [OK],
then press <0>.
The date/time/zone and daylight
saving time will be set and the menu
will reappear.