Related Manuals for Makita DA301D
Summary of Contents for Makita DA301D
- Page 1 INSTRUCTION MANUAL Cordless Angle Drill DA301D DA391D 002041 WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
-
Page 2: Specifications
3-11-8, Sumiyoshi-cho, Anjo, Aichi, JAPAN ENE032-1 Intended use Authorized Representative in Europe: The tool is intended for drilling in wood, metal and Makita International Europe Ltd. plastic. Michigan Drive, Tongwell, Milton Keynes, Bucks MK15 8JD, ENGLAND GEA002-3 For Model DA391D... - Page 3 operating a power tool. Distractions can cause dust extraction collection facilities, you to lose control. ensure these are connected and properly used. Electrical Safety Use of these devices can reduce dust-related Power tool plugs must match the outlet. Never hazards. Power tool use and care modify the plug in any way.
-
Page 4: Specific Safety Rules
ENC004-1 keys, nails, screws, or other small metal objects that can make a connection from one IMPORTANT SAFETY terminal to another. Shorting the battery INSTRUCTIONS terminals together may cause burns or a fire. 27. Under abusive conditions, liquid may be ejected from the battery, avoid contact. -
Page 5: Functional Description
Let a hot battery cartridge cool down before when released. charging it. To start the tool, simply pull the switch trigger. Tool Charge the Nickel Metal Hydride battery speed is increased by increasing pressure on the switch cartridge when you do not use it for more than trigger. -
Page 6: Operation
To remove the bit, hold the ring and turn the sleeve damaged. counterclockwise. NOTE: For model DA301D When driving wood screws, predrill pilot holes to • 1. Chuck key make driving easier and to prevent splitting of the workpiece. -
Page 7: Maintenance
Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Drill bits • Screw bits • Various type of Makita genuine batteries and •... - Page 8 Makita Corporation Anjo, Aichi, Japan 883827D227...