Installation Instructions; Installing Your Gas Range; Step 1. Unpack The Range; Step 2. Connect The Range To Gas Supply - Samsung NX58K3310S series Installation Manual

Hide thumbs Also See for NX58K3310S series:
Table of Contents

Advertisement

Available languages

Available languages

Tools and materials
Parts needed
Gas line shut-off
Flexible metal
valve
appliance connector
½ in (ID) x 5 ft
135-degree elbow
Lag bolt or ½-in
(optional)
(OD) sleeve anchor
Tools needed
Flat-blade
Phillips screwdriver
screwdriver
Nut driver
Pencil and ruler
Utility knife
Soapy water
solution
16 English
NX58K3310SS_AA_AC_DG68-00783A-00_EN.indd 16
Flare union adapter
Flare union adapter
¾ in or ½ in (NPT) x
½ in (NPT) x ½ in
½ in (ID)
(ID)
Open-end or
Pipe wrench (2)
adjustable wrench
Level
Pipe joint compound

Installation instructions

Installing your gas range

IMPORTANT:
Please read the following instructions, as well as the Important Safety Instructions
section at the front of this manual, completely and carefully BEFORE installing
and/or operating the gas range. Improper installation, adjustment, service, or
maintenance can cause personal injury or property damage.
To order parts or accessories, contact your
local retailer or refer to the last page.
To ensure proper installation, we strongly
recommend that you hire a professional
installer.

Step 1. Unpack the range

Remove all packaging materials. Failure to remove packaging materials could
result in damage to the appliance.
Inventory all loose parts against the Parts supplied components listed on page 15.
Check for shipping damage and/or missing parts. Any damage and/or missing
parts should be reported to your local retailer.

Step 2. Connect the range to gas supply

Shut off the main gas supply valve before disconnecting the old range and leave
it off until the new hookup has been completed. Don't forget to relight the pilot on
other gas appliances when you turn the gas back on.
Because hard piping restricts movement of the range, the use of a CSA
International-certified flexible metal appliance connector is recommended unless
local codes require a hard-piped connection.
NOTE
NOTE
2015-12-02
7:26:03

Advertisement

Table of Contents
loading

Table of Contents