Table of Contents
Advertisement
INSTALLATION & WIRING INSTRUCTIONS
IMPORTANT NOTE:
The mains lead on this equipment is supplied with a moulded plug incorporating a fuse.
The value of the fuse is indicated on the pin face of the plug and, if it requires replacing,
a fuse approved to BS 1363 of the same rating must be used. Never use the plug with
the fuse cover omitted if the cover is detachable. If a replacement fuse cover is required,
it must be of the same colour as the pin face of the plug. Replacement covers are
available from your Dealer. If the fitted plug is not suitable for the power points in your
house or the cable is not long enough to reach a power point, you should obtain a
suitable safety approved extension lead or consult your Dealer for assistance. However,
if there is no alternative to cutting off the plug, remove the fuse and then safely dispose
of the plug. Do not connect the plug to a mains socket, as there is a risk of shock hazard
from the bared flexible cord.
16
Advertisement
Table of Contents
