NEC V300X User Manual page 77

 Menu Descriptions & Functions [RESET]
Returning to Factory Default [RESET]
The RESET feature allows you to change adjustments and settings to the factory preset for a (all) source (s) except
the following:
Resets the adjustments for the current signal to the factory preset levels.
Reset all the adjustments and settings for all the signals to the factory preset.
All items can be reset EXCEPT
Clearing Networking Settings [NETWORK SETTINGS] (V300X/V260X)
Clearing Lamp Hour Meter [CLEAR LAMP HOURS]
the ENTER button.
NOTE: Elapsed time of the lamp use will not be affected even when [RESET] is done from the menu.
NOTE: The projector will turn off and go into standby mode when you continue to use the projector for another 100 hours after the
lamp has reached the end of its life. In this condition you cannot clear the lamp hour meter on the menu. If this happens, press the
HELP button on the remote control for 10 seconds to reset the lamp clock back to zero. Do this only after replacing the lamp.
Downloaded From projector-manual.com NEC Manuals
68
5. Using On-Screen Menu
-