Source Input Renaming - McIntosh ma5200 Owner's Manual

Input Settings
Input Name Connection Type
TUNER
CD
CD2
AUX
PHONO MM

Source Input Renaming

The MA5200 Default Input Names (CD, AUX, DVD,
customized with a different name up to nine charac-
characters for renaming the input include the follow-
ing: ! < > * , / - _ 0 1 2 3 4 5 6 7 8 9 A B C D E F G H
I K L M N O P Q R S T U V W X Y Z .
In the following example, the AUX Input will be re-
named to "MY-PHONE".
1. Press and hold the INPUT CONTROL until the
Front Panel Display indicates the Setup Mode is
active. Then rotate the INPUT CONTROL and
select the Setup Menu item "SETUP: SOURCE
NAME, AUX >> AUX". Refer to figure 8.
SETUP: SOURCE NAME
AUX >> AUX
Figure 8
Note: If the AUX Input is not displayed, press the
VOLUME Control repeatedly until it is dis-
played.
2. Press and hold the VOLUME Control until the
character "A" of the name AUX starts flashing.
Refer to figure 9.
SETUP: SOURCE NAME
New Level
AUX
(Trim)
3. Rotate the VOLUME Control until the character
"M" appears. Refer to figure 10.
SETUP: SOURCE NAME
AUX
4. Press the the VOLUME Control until the character
"U" starts flashing. Refer to figure 11.
SETUP: SOURCE NAME
AUX
5. Rotate the VOLUME Control until the character
"Y" appears. Refer to figure 12.
SETUP: SOURCE NAME
AUX
6. Repeat steps 3 thru 5 until the new name of "MY-
PHONE" is indicated on the Front Panel Display.
Refer to figure 13.
SETUP: SOURCE NAME
AUX
7. To save the new Input Name press and hold the
VOLUME Control until the word SAVED appears
momentarily on the Front Panel Display. Refer to
figure 14.
SETUP: SOURCE NAME
AUX
Note: When direct accessing the "MY-PHONE"
>> AUX
Record any changes made to the various default Input
Figure 9
Names in the following chart for future reference.
8. To exit from the Setup Mode, press the INPUT
CONTROL and the Front Panel Display will revert
back to its normal display.
>> MUX
Figure 10
Default Input Name
TUNER
CD
CD2
>> MUX
AUX
Figure 11
PHONO MM
>> MYX
Figure 12
>> MY-PHONE
Figure 13
>> SAVED
Figure 14
Setup, con't
Input using the Remote Control, press the AUX
Pushbutton.
Source Input Renaming
New Input Name
19