Samsung SR8950 User Manual page 218

About the IrDA sensor
• The infrared signal transmission may not be
smooth in locations exposed to halogen lamps or
CAUTION
in outdoor locations.
• Vacuum cleaning robot uses 3 types of infrared
devices and a device may not work in front of
another device with a higher priority.
• When controlling the vacuum cleaning robot
with the remote control, the vacuum cleaning
robot may cross the virtual fence of the VIRTUAL
GUARD or run against an obstacle, because the remote control signal has a higher priority than
the VIRTUAL GUARD signal.
• When using the vacuum cleaning robot in a small location or at a close distance, it may
malfunction due to interference of the infrared signals.
• Install the VIRTUAL GUARD away from the charger as auto charging may be interrupted if the
VIRTUAL GUARD is near the charger.
• If more than one vacuum cleaning robot is used simultaneously, they may malfunction due to
interference of the infrared signals.
26_ operating
[Infrared Signal Priority] [Infrared Signal Priority]
> >
Remote Remote Virtual Virtual
Control Control guard guard
Charger Charger