Mercury Notice - Honeywell F111U Product Data

In-ceiling media air cleaner with ultraviolet air treatment system
Hide thumbs Also See for F111U:
Table of Contents

Advertisement

F111U IN-CEILING MEDIA AIR CLEANER WITH ULTRAVIOLET AIR TREATMENT SYSTEM
CAUTION
Breakable Glass Hazard.
Can cause personal injury.
Be careful when inserting lamps(s) into lamp base.
Wear protective gloves when handling lamp(s).

MERCURY NOTICE

This device contains mercury in the sealed ultraviolet
lamp(s).
Do not place your used lamp(s) in the trash.
Dispose of properly.
CAUTION
Broken Lamp Cleanup Hazard.
Do not use household vacuum cleaner.
Sweep debris into a plastic bag and dispose of
properly.
Contact your local waste management authority for
instructions regarding recycling and the proper
disposal of old lamp(s).
9. Insert the lamp into the UV base module with the lamp
light indicator at the five o' clock position. Do not touch
the lamp surface with your hands. Fully insert the ultra-
violet lamps into the base modules.
10. Rotate the lamp clockwise until it snaps into place with
the lamp indicator light aligned with the raised button on
the unit grill.
11. Install the high-efficiency main filter. Note airflow direc-
tion arrows if present. Install the filter with the direction
arrow pointing towards the motor / blower.
12. Lock and secure the high-efficiency particle filter into
place by closing both latches.
IMPORTANT
Do not touch the pleated filter media. Handle only the filter
frame to prevent damage to the filter media.
13. Install the prefilter in the air cleaner grill. Note the air
flow direction arrows and install the filter with arrows
pointing towards the high-efficiency main filter.
Remote 3 Speed Wall Switch
The 190097C Remote Wall Switch Assembly allows control of
the F111U model air cleaners from a a location separate from
the air cleaner. The assembly includes a remote switch with
an outlet box cover, outlet box, extension ring, and a wire
harness. Wiring to connect the remote switch and air cleaner
must be furnished separately. More detailed instructions
included with 190097C Remote 3 Speed Wall Switch.
CAUTION
• This installation to be performed only by a qualified
installer.
• All wiring to comply with local electrical codes.
68-0275-2 Revised 3-09
• Disconnect power to air cleaner at fuse or breaker
before beginning work. Failure to do so can result in
shock hazard endangering equipment and personal
safety of installer.
• Only one air cleaner can be connected to a remote
switch
1. Disconnect power to air cleaner.
2. Mount 4" x 4" outlet box at desired remote location.
3. Attach 3/4" extension ring to outlet box.
4. Run six conductor, color-coded, 18-gauge wires from
the remote switch location to the air cleaner.
5. Use four wire nuts to connect four color-coded, lead
wires on the remote switch to four color-coded wires
from the air cleaner. (Red, Blue, Violet, Brown)
6. Use one wire nut to connect white color-coded, lead
wire from the air cleaner to single color-coded wire from
the power supply. (White)
A100001
Fig. 5. Wiring 3-Speed Remote Switch
7. Connect the ground wire from the power supply to a
ground stud of the outlet box.(Green)
8. Connect the ground wire from the air cleaner to the
ground stud of the outlet box.(Green)
9. Use one wire nut to connect the black color-coded, lead
wire on the remote switch to the black color-coded wire
from the power supply.
10. Fold wires into box and mount remote switch on outlet
box. Leave switch in OFF position.
11. On the air cleaner remove two screws on wiring com-
partment cover and open
12. Run six conductor, color coded, 18 gauge wires from
the remote switch through the air cleaner access open-
ing into the wiring compartment. Strip ends of remote
switch lead wires
13. Connect four wires on air cleaner to remote switch lead
wires with wire nuts following color code used at remote
switch. (Red, Blue, Violet, Brown)
14. Connect one wire on air cleaner to power supply wire
with a wire nut following color code used at remote
switch. (White)
15. Connect the ground wire from the remote switch to a
ground stud of the wiring compartment cover.(Green)
16. Fold wires into wiring compartment. Replace wiring
compartment cover.
17. Turn on power to air cleaner at fuse or breaker.
6
BLACK

Advertisement

Table of Contents
loading

Table of Contents