Cleaning The Milk System - Bosch TCC78K751 Instruction Manual

Table of Contents

Advertisement

Available languages

Available languages

52 | English
7. Wipe out the inside of the tray holders.
8. Clean the milk frother (procedure de-
scribed below).
9. Replace all the parts again.
Important: Drip tray for coffee
outlet (27) and coffee grounds
container (28) should be emptied
and cleaned daily to prevent mould
from developing.
If the appliance is switched off us-
ing the button (3)
switching off) or it switches off in
accordance with the "Auto off after"
settings, the rinsing process will
automatically take place. In other
words the pipework inside the ap-
pliance is cleaned by the machine
itself.
Important: If the appliance has not
been used for a prolonged period
of time (e.g. after a vacation), clean
the entire appliance thoroughly, in-
cluding the milk system and brew-
ing unit.
Bosch
Z
(rinsing and

Cleaning the milk system

Risk of burns! The milk frother
(12) gets very hot. After use,
allow to cool down first before
touching.
The message
Press O
Please short rinse the milk system
appears
– if cleaning has not been performed after use
– if the appliance has just switched off
automatically and it was not cleaned
beforehand.
If this message appears, start with Step 2
under "Short rinse for milk system".
Clean the milk system immediately after use.
Short rinse for milk system:
1. In the menu for drink selection, select
Short rinse
and press
2. Place a cup under the milk frother (12)
and the end of the milk tube in the cup.
o
3. Press
start/stop (10). The appliance
now fills the cup automatically with water
and draws it in again through the milk
tube for rinsing. The rinse procedure
takes about 1 minute.
4. Empty the cup and clean the milk tube.
All the parts can also be put in the
dishwasher.
.
o
start/stop (10).
TCC78K751 | 02/2014

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents