Parts And Controls; Initial Mower Setup; Adjust The Handlebar - Honda HRX217HZUA Owner's Manual

PARTS AND CONTROLS

KEY
SWITCH
RECOIL
STARTER
(P. 9)
GRIP
HANDLEBAR
ADJUST KNOB (2)
(P. 4)
OIL FILLER CAP
(P. 12)
BLADE CONTROL
(P. 8)
LEVER
BATTERY
BOX
(P. 13)
CUTTING HEIGHT
ADJUSTMENT
(P. 6)
LEVER (4)
SPARK PLUG
(P. 13)
CAP
AIR FILTER
(P. 12)
CARBURETOR
FUEL VALVE ON
(P. 8)
SHIFT LEVER
THROTTLE LEVER
(P. 8)
REAR
DISCHARGE
(P. 5)
GUARD
FUEL TANK CAP
MUFFLER
(P. 13)
BLADE CONTROL
(P. 8)
BUTTON
DRIVE
CLUTCH
LEVER
(P. 8)
GRASS BAG
(P. 6)
CLIP DIRECTOR®
(P. 5)
KNOB
FUEL VALVE OFF

INITIAL MOWER SETUP

List of Parts
With help from an assistant, carefully remove the mower and loose
parts from the carton and compare the loose parts against the
following list. Contact the authorised Honda dealer from whom you
purchased the mower if any of the loose parts shown are not included
with your mower.
Ref. Description
No.
(P. 7)

Grass bag frame

Grass bag

Key, and owner's manual


Adjust the Handlebar

1. With the handlebar adjust knobs in the unlocked position, raise the
handlebar into the mowing position.
Take care not to kink
the cables.
2. Align the adjust knobs with one of the three holes on each handle
stay. Setting the adjust knobs in the lowest holes raises the
handlebar to its highest position.
3. Turn the handlebar adjust knobs 90 degrees into the lock position,
making sure both sides are positioned at the same height.
4. Remove all the cardboard from around the handlebar.


HANDLEBAR ADJUST
KNOBS
LOCKED
UNLOCKED
Qty.
1
1
1
3