Toshiba 20SLD1 Owner's Manual page 55

Lcd tv/dvd combination
Table of Contents

Advertisement

Setting details
Sound
D.R.C
D.R.C (Dynamic Range Control) enables you to control the
dynamic range so as to achieve a suitable sound for your
equipment.
ON: Loud sound such as explosion is toned down
slightly when played back. This is suitable when it
is connected to a stereo.
OFF:It plays back at the recording level on the disc.
Notes:
• This function works only during playback of Dolby Digital
recorded discs.
• The level of Dynamic Range Reduction may differ
depending on DVD video disc.
Digital audio out
You can select the output sound format corresponding to
your system connection.
Analog 2ch: Select when connected to a TV or stereo
system via the analog audio jacks.
Bitstream: Select when connected to an amplifier
equipped with a Dolby Digital,DTS,MPEG1 or
MPEG2 decoder. The player outputs digital
audio signal in the bitstream format when you
play a DVD video disc recorded in the Dolby
Digital,DTS, MPEG 1 or MPEG-2 recording
system.
PCM:
Select when connected to a 2 channel digital
stereo amplifier. The player outputs sounds in
the PCM 2ch format when you play a DVD
video disc recorded on the Dolby Digital,
MPEG1 or MPEG2 recoding system.
Preference
Parental
Some discs are specified as not suitable for children. Such
discs can be limited not to playback with the unit.
1) Press
or
to select "Parental", then press
OK.
2) Press
or
to select the parental level. The
limitation will be more severe as the level number is
lower.
Then press OK. "Password" screen will
appear. Press "55555" using Number buttons(0-9).
(Please note, this is pre-setting password of this unit).
Then press OK.
• Level 8: Virtually all DVD software can be playback.
• Level 1: DVD software for adults cannot be played
back.
D.R.C.
ON
Menu
E.B.L.
Parental
: Off
: English
: Off
Notes:
Subtitle
TV Screen
Digital audio out
Set Password
: 4:3
: English
D-out
• Depending on the discs, the unit cannot limit
Output
Display
Audio
: On
: Interlace
: English
Picture Mode
DivX(R) VOD
: Auto
• Some discs may not be encoded with specific rating level
JPEG Interval
: 5 Seconds
Screen Saver
: On
• The password is required every time when you change
Set the new password
1) Press
2) Press Number buttons (0-9) to input the old password.
3) The cursor will move to the "New password" column.
4) The cursor will move to the "Confirm password"
5) "OK" is highlighted. Press OK. Now your new
Notes:
DivX(R) VOD
In order to play DivX
this unit, you first need to register the unit with your DivX
VOD content provider. You do this by generating a DivX
DRC
E.B.L.
Menu
Parental
: Off
: English
: Off
08
VOD registration code which you submit to your provider.
TV Screen
QSound
Subtitle
: On
: English
: 4:3
Password
Display
Audio
DivX(R)VOD
: English
: On
Picture Mode
: Auto
Default
JPEG Interval
: 5 Seconds
Screen Saver
: On
Default
Press
highlighted. Press OK and some function settings will be
reset to the factory setting.
Note:
If each setup (pages 54 to 55) has completed, the unit can
always work under the same condition (especially with DVD
discs).
Each setup will be retained in the memory even if you turn
the power off.
55
playback.
information though its disc jacket says "adult." For those
discs, the age restriction will not work.
the parental level.
or
to select "Password", then press OK.
"Change" is highlighted, then press OK. "Change
Password" menu will appear.
(If the password has not been set yet after you purchase
this unit, it is "55555").
Press Number buttons (0-9) to input the new password.
column. Press Number buttons(0-9) to input the new
password again.
password has been set.
• Both the factory password and user password can be
used.
• If you forget your password, you can enter the factory
password.
®
VOD (Video On Demand) content on
Press
or
to select "DivX(R) VOD". Then press OK.
"DRM code" is highlighted. Press OK.
Your 8-character registration code is displayed. Make a
note of the code as you will need it when you register
with a DivX
®
VOD provider.
Then press OK to select Done.
or
to select "Default", then press OK. "Reset" is
®
®

Advertisement

Table of Contents
loading

Table of Contents