Table of Contents
Advertisement
Connecting an amplifier equipped with a
®
Dolby
Digital decoder
Dolby Digital
Dolby Digital is the surround sound technology used in theaters
showing the latest movies, and is now available to reproduce this
realistic effect in the home. You can enjoy motion picture and live
concert DVD video discs encoded via the Dolby Digital recording
system with this dynamic realistic sound by connecting the TV/DVD to
a 6 channel amplifier equipped with a Dolby Digital decoder or Dolby
Digital processor. If you have a Dolby Surround Pro Logic decoder, you
will obtain the full benefit of Pro Logic from the same DVD movies that
provide full 5.1-channel Dolby Digital soundtracks, as well as from titles
with the Dolby Surround mark.
TV/DVD back panel
To OPTICAL
DIGITAL AUDIO OUT
Connecting an amplifier equipped with a DTS
decoder
Digital Theater Systems (DTS)
DTS is a high quality surround technology used in theaters and now
available for home use, on DVD video discs or audio CDs.
If you have a DTS decoder or processor, you can obtain the full benefit
of 5.1 channel DTS encoded sound tracks on DVD video discs or audio
CDs.
TV/DVD back panel
To OPTICAL
DIGITAL AUDIO OUT
Amplifier equipped with a
Dolby Digital decoder
To OPTICAL
type digital
audio input
Amplifier equipped with
a DTS decoder
To OPTICAL
type digital
audio input
You will need:
• one optical cable
Notes:
• DO NOT connect the OPTICAL jack of the
TV/DVD to the AC-3 RF input of a Dolby
Digital Receiver. This input on your A/V
Receiver is reserved for Laserdisc use only
and is incompatible with the OPTICAL jack
of the TV/DVD.
• Connect the OPTICAL jack of the TV/DVD
to the "OPTICAL" input of a Receiver or
Processor.
• Refer to the owner's manual of the
connected equipment as well.
• The output sound of the TV/DVD has a wide
dynamic range. Be sure to adjust the
receiver's volume to a moderate listening
level. Otherwise, the speakers may be
damaged by a sudden high volume sound.
• Turn off the amplifier before you connect or
disconnect the TV/DVD's power cord. If you
leave the amplifier power on, the speakers
may be damaged.
Manufactured under license from Dolby
Laboratories. Dolby and the double-D
symbol are trademarks of Dolby
Laboratories.
Confidential unpublished works .
Copyright 1992-1997 Dolby Laboratories.
All rights reserved.
You will need:
• one optical cable
Notes:
• Connect the OPTICAL jack of the TV/DVD
to the "OPTICAL" input of a Receiver or
Processor.
• Refer to the owner's manual of the
connected equipment as well.
• The output sound of the TV/DVD has a wide
dynamic range. Be sure to adjust the
receiver's volume to a moderate listening
level. Otherwise, the speakers may be
damaged by a sudden high volume sound.
• Turn off the amplifier before you connect or
disconnect the TV/DVD's power cord. If you
leave the amplifier power on, the speakers
may be damaged.
DTS and DTS Digital Out are trademarks of
DTS, Inc.
18
Advertisement
Table of Contents
