Warning Lamps And Indicators - Ford 2015 Focus Owner's Manual

Hide thumbs Also See for 2015 Focus:
Table of Contents

Advertisement

Engine Coolant Temperature
Gauge
WARNING
Never remove the coolant reservoir
cap while the engine is running or hot.
At normal operating temperature the
indicator will remain in the center section.
Note: Do not restart the engine until the
cause of overheating has been determined
and resolved.
If the needle enters the red section, the
engine is overheating. Stop the engine,
switch the ignition off and determine the
cause once the engine has cooled down.
See Engine Coolant Check (page 213).
Fuel Gauge
Switch the ignition on. The fuel gauge will
indicate approximately how much fuel is
left in the fuel tank. The arrow adjacent to
the fuel pump symbol indicates on which
side of your vehicle the fuel filler door is
located.
WARNING LAMPS AND
INDICATORS
The following warning lamps and
indicators alert you to a vehicle condition
that may become serious. Some lamps
illuminate when you start your vehicle to
make sure they work. If any lamps remain
on after starting your vehicle, refer to the
respective system warning lamp for further
information.
Note: Some warning indicators appear in
the information display and operate the
same as a warning lamp but do not
illuminate when you start your vehicle.
Focus (CEW) Vehicles Built From: 16-02-2015, CG3630en enGBR, Edition date: 01/2015, First Printing
Instrument Cluster
Anti-Lock Braking System Warning
Lamp
to have the normal braking system
(without anti-lock braking system) unless
the brake system warning lamp is also
illuminated. Have your vehicle checked by
an authorized dealer.
Automatic High Beam Lamp
Equipped)
Battery Warning Lamp
equipment. Have your vehicle checked by
an authorized dealer immediately.
Blind Spot Monitor Indicator
Equipped)
Information System (page 162). See
Information Messages (page 79).
Brake System Warning Lamp
72
If it illuminates when you are
driving, this indicates a
malfunction. You will continue
It will illuminate when this
feature is on. See Automatic
High Beam Control (page 59).
If it illuminates when driving, this
indicates a malfunction. Switch
off all unnecessary electrical
It will illuminate when you switch
this feature off or in conjunction
with a message. See Blind Spot
It will illuminate when you
engage the parking brake with
the ignition on.
(If
(If

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents