Ford 2015 Focus Owner's Manual page 162

Note: The system may assist you when
driving on fast main roads and freeways.
Note: The system may not operate during
hard braking or acceleration and when you
are intentionally steering your vehicle.
Note: The system will operate with a
minimum of one tracked lane marking.
Note: The system will only operate above
vehicle speeds of approximately 40 mph
(65 km/h).
The sensor is located behind the interior
mirror. It continuously monitors conditions
to alert you of unintentional lane drifting
at high speeds.
The system will automatically detect and
track the lane markings on the road. If the
system detects that your vehicle is
unintentionally drifting toward the lane
markings, a warning will be shown in the
display. There is also a warning given in the
form of a vibration felt through the steering
wheel.
Using Lane Keeping Alert
Switching the System On and Off
Note: When you switch the system off, a
warning indicator will remain illuminated in
the information display. See Warning
Lamps and Indicators (page 72).
Note: The system status and settings will
remain unchanged when you switch the
ignition on and off.
Switch the system on and off using the
button on the direction indicator stalk.
Focus (CEW) Vehicles Built From: 16-02-2015, CG3630en enGBR, Edition date: 01/2015, First Printing
Driving Aids
Press the button twice to switch the
system on. Press the button once to switch
the system off.
Setting the Steering Wheel Vibration
Level
The system has three intensity levels which
you can set using the information display.
See General Information (page 76).
Setting the System Sensitivity
You can adjust how quickly the system
warns you. The system has two sensitivity
levels which you can set using the
information display. See General
Information (page 76).
System Warnings
A column of lane markings are displayed
on either side of the vehicle graphic.
The lane markings are color coded as
follows:
• Green: The system is ready to warn you
of any unintentional lane departure.
• Red: Your vehicle is approaching or is
too close to the detected lane
boundary. Take immediate safe action
to reposition your vehicle.
• Gray: The relevant lane boundary will
be suppressed.
160