Panasonic KX-P8410 Operating Instructions Manual page 134

Care and Maintenance
134
Error message
No ASPI managers were
found!!
One or more ASPI for DOS
managers are loaded which
do not support ASPI for
WIN16!!
Printing aborted for
occurred SCSI error.
SCSI Error!! Time Out
occurred.
Unable to Allocate Memory
*.DLL function Error
*.DLL not found
Some application settings may take priority over the printer driver settings.
Possible cause
SCSI board and its
driver are not installed
correctly.
An illegal error has
occurred.
The printer is not
responding.
The computer's
internal memory for
printing is insufficient.
The necessary file for
printing is not found.
Recovery
Correctly install the
SCSI board and its
driver. (Refer to the
manual of the SCSI
board.)
For any other trouble
related to SCSI, refer to
the SCSI section of
Care and Maintenance
( P. 127).
BConfirm the SCSI
board is correctly
installed in the
computer or cable is
correctly connected.
BTurn off the
computer, then turn it
on again.
Turn off the printer and
the computer, then turn
them on again. Print the
document again.
BClose all applications
except for the one
which controls the
printer, then print
again.
BTurn off the
computer, then turn it
on again.
Reinstall the KX-P8410
software.